Simon Skat MPF

Simon Skat MPF

Simon Skat M Istanium LED®  decorative urban luminaire, die-cast aluminium, post-top fastening. 

It provides necessary lighting in urban and private environments with maximum energy efficiency:

 

  • Light flux > 3370 lm
  • Savings up to 65% 
  • Efficiency up to 138 lm/W

Firm commitment to lighting flexibility and elegance with Skat M

Properties
Street
Pedestrian streets
Roundabouts intersections
Garden park
Square
Commercial areas
Luminous Distributions

Configure the Skat M Istanium LED Luminaire to suit you

Simon's configurator provides high quality light reducing light pollution and energy consumption

imatge_conf_skat
Regulation

2N- with regulation without control line; self-regulation

The electronic equipment of the luminaire has a programmed timer that reduces the power by half after 4.5 hours from the moment of switching on.

 

1N without regulation

The electronic equipment delivers 100% of the power with no option to be regulated. If there is any fluctuation in the line voltage, the equipment compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Similarly, if the electrical cabinet has a flow regulation unit at the head, the unit will not regulate the lamp (an Istanium LED luminaire with CAD regulation is required).

 

1-10 Regulation governed by protocol 1-10V

The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).

 

DALI regulation governed by DALI protocol

The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).

Protection

IP65

Completely dustproof. Protected against water jets.

 

IP66

Completely dustproof. Protected against strong jets of water or heavy seas.

 

IK08

Protection against external mechanical shocks of 5 J of energy and 1.7 Kg/295 mm of mass and height of the impact piece.

Materials and finishes

Body

Aluminum base

 

Closure system

By stainless steel screws

 

Serpentine: GTF

Unbreakable Tempered Clear Flat Glass

 

MTT

Four-sided transparent methacrylate

 

MOT

Engraved opal methacrylate

Regulation and certification

UNE-EN 60598-2-3

Public lighting devices. Part 2: corresponding to the particular type of luminaire studied.

 

UNE-EN 62493

Evaluation of lighting equipment with respect to human exposure to electromagnetic fields.

 

UNE-EN 61000-2-3

Electromagnetic compatibility (EMC). Part 3-2: Limits. Harmonic current emission limits (equipment with input current <= 16 A per phase).

 

UNE-EN 55015

Limits and methods of measurement of the characteristics linked to radioelectric disturbances of lighting and similar devices.

 

UNE-EN 61547

General purpose lighting equipment. EMC immunity requirements.

 

UNE-EN 50581

Technical documentation for the evaluation of electrical and electronic products with respect to the restriction of hazardous substances.

Color Temperature

4,000K

Neutral white light

 

3,000K

Warm white light

 

2,700K

Soft white light

 

XDL 2,200K

Extra warm white light.

 

APC

Amber turned into phosphorus.

Technical characteristics

Protection degree   IK08 - IP66

Class

Certifications   CE - ENEC

Weight   8 kg

Color temperatures   NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC

Color rendering index   >70

Upper hemisphere flow    <1% (zonas E1)

LED Duration (L90 B10 a Ta=25 ºC y Tj=95 ºC)   100.000 h

Photometric distribution (Optics)   RG/ RJ/ RA/ RE/ SA/ RF/ RW

 
Simon Urban Solutions Catalogue
 
Simon Skat - Technical Sheet
 
Simon Skat - EU Declaration of Conformity